Drawcords, eyelets and aglets form one trim system. Specify their dimensions, materials, attachment and compatibility together, then inspect them on a washed hoodie. A trim catalogue photograph cannot show whether the assembly will fray, detach or damage the fabric.
Resolve age-group and market restrictions first
Drawcord design can be a safety issue, particularly in children’s clothing. Identify the actual age range, garment category and selling markets before including a hood or neck cord. Obtain the applicable requirements and retailer rules from the responsible compliance reviewer; do not assume an adult design can be carried into smaller sizes.
Where a cord is not permitted or is unnecessary, redesign the hood without it rather than choosing a different decorative tip. This guide is a procurement specification framework, not a complete product-safety determination. Safety review should be completed before trim tooling, artwork or bulk component commitments.
Specify the cord as more than a color
Record cord material, construction, diameter or flat width, color reference and finished length, with measurement and end-treatment conventions. Define any anchoring and the channel path. Check how the cord moves through the finished opening without excessive friction, twisting or catching on stitches.
Assess the cord and garment after care for shrinkage, fraying and color transfer. A cord that matches the body before washing may change differently afterward. If the design has an exposed length requirement, show how it is measured on the finished garment and how the size range affects it.
Choose eyelets with the fabric assembly in mind
A metal eyelet or grommet needs a specified base material, finish, dimensions and setting arrangement. Ask how the fabric is supported at the opening and whether the selected component suits the complete layer thickness. Reinforcement and setting quality matter as much as the visible ring.
An embroidered eyelet avoids a metal ring but still needs an appropriate stitched opening, stabilization and clean finishing. Check cord passage, loose threads and fraying after repeated use. Neither option should be approved from appearance alone; inspect the inside and the surrounding material for damage.
For metal components, check rough edges, coating damage, discoloration or corrosion after the agreed care and other applicable exposure tests. Select tests and chemical requirements for the actual market and materials. A named metal by itself does not establish compliance or guarantee that the finish remains intact.
Treat aglet retention as an assembly question
An aglet is the tip on the cord end. Record its construction, material, dimensions, finish and attachment method. If tips detach, compare the cord diameter, tip fit and attachment process against the approved sample. Increasing crimp pressure without checking the result can damage the cord or component.
Agree an appropriate retention check with defined conditions, and repeat it after care where relevant. Record the actual outcome and failure location rather than simply writing “pull test passed.” A detached component can create more serious risks depending on the wearer and product, so defect classification should be agreed through the safety and inspection plan.
Hoodie trim-system card
| Trim-card field | Information to enter | Approval evidence |
|---|---|---|
| Safety scope | Age group, garment category, markets and reviewer | Design clearance or removal of restricted cord |
| Cord | Material, construction, size, length and anchoring | Passage, appearance and after-care condition |
| Eyelet | Type, dimensions, support and setting/ stitching reference | Retention, fabric integrity and cord compatibility |
| Aglet | Material, finish, dimensions and attachment | Defined retention result before and after care |
| Traceability | Supplier, article, lot and approved sample ID | No unapproved component substitution |
Attach photographs showing the outside and inside of the assembly. Keep physical components as references because a photograph may not reveal a sharp edge, finish difference or change in dimensions.
When the trim supplier, cord construction or hood layering changes, repeat the affected assembly checks. A replacement that appears identical can behave differently once set into a new fabric thickness. Release the complete combination rather than approving each part in isolation.
