Customers send back white tees with yellow stains under the arms. Is it a fabric fault or a laundry issue?
Underarm yellowing usually comes from body products and sweat building up in the fabric, not from a defect. You can still reduce it with fabric choice, pre-wash testing and honest care advice.

Returns of our white cotton tees show yellow marks under the arms after a month of wear, even though the wearers wash them often. How do we check whether it is our fabric or normal wear?
Main answer
Yellow marks under the arms on white and light tees are one of the most common returns. They are usually caused by a build-up of sweat, body oils and the residues of deodorants or antiperspirants in the fabric, which wash out only partly and then discolour over time. The stain is not usually a sign that the fabric was made badly, but your fabric and finish can make it more or less likely, so it is worth testing.
Separate causes before you judge
Ask where and when the yellowing appears. If it shows only under the arms, comes after wear and is worse on tees worn with deodorant, it points to build-up. If it appears in storage on unworn garments, it may be a different issue, such as yellowing from finishes or packaging, which is covered in our post on tees yellowing before sale. If it appears evenly across the fabric, check the fabric and optical brightener use.
What fabric tests can show
ISO 105-E04 tests colour fastness to perspiration, which tells you whether dyes change or stain other fabrics when wetted with test perspiration solutions. It is mainly useful for coloured tees. It does not copy long-term deodorant build-up, so no single standard test result will promise that a white tee will never yellow. Ask your lab whether it can run a wear-simulation or a customised test using the deodorant types your customers use, and treat the result as a comparison between fabrics, not a guarantee.
Fabric and construction choices
Fabric weight, fibre mix and finishes can all affect how much residue is held in the underarm area. Some brands add underarm sweat pads, use a looser fit under the arm, or choose a fabric that dries faster. Compare options in a trial: have several fabrics worn and washed, then compare the underarm area under good light.
What the care label and product page can say
The FTC Care Labeling Rule, 16 CFR Part 423, requires care instructions supported by a reasonable basis. Wash tests with a named procedure such as ISO 6330 will show how your fabric holds up with your label instructions. On the product page, you can add practical advice such as washing soon after wear and letting deodorant dry before dressing, without promising the stain will never appear.
Customer service
Agree a clear approach to returns. If you find that your fabric yellows more than others in trial, treat it as a product issue and change the fabric.
Sources and further reading
- ISO 105-E04:2013 — Colour fastness to perspiration
- ISO 6330:2021 — Domestic washing and drying procedures for textile testing
- eCFR — 16 CFR Part 423, Care Labeling of Textile Wearing Apparel
Standards and rules are summarised from their published scope or official guidance. Use the current edition and confirm requirements for your market.
Three perspectives on this question
Purchasing perspective
I'd ask the mill to supply two or three white fabrics for a wear trial, so we can compare underarm results before bulk.
Merchandising perspective
White tees are our volume seller, so I'd rather pay for a better fabric than handle a steady stream of underarm returns.
QC perspective
We'd wear-test and wash several white fabrics and photograph the underarm area under the same light at each stage.
Working on a similar program?Send your tech pack, fabric references and test requirements. We reply with a quote and the questions we need answered.
Contact Knitwear BaseRelated products
Related articles
- Apparel Fabric Sourcing China: Fabric Selection, MOQ and Mill Lead Time
- Bamboo Fabric Clothing Manufacturer: Processing Route, Stability and Labelling
- Private Label Activewear Manufacturer: Components, Performance Fabric and Seam Choice
- Sportswear Manufacturer China: Performance Fabric, Programme Type and Seam Choice
- Loungewear Manufacturer China: Sets, Seasonal Fabric and Grading Decisions
- Oversized Hoodie Manufacturer: Drop Shoulder, Body Width and Fit-Block Changes
- Custom Hoodie Manufacturer: What to Confirm Before You Send a Tech Pack
- Oversized T Shirt Manufacturer: Drop Shoulder, Body Width and Fit-Block Changes
- Custom T Shirt Manufacturer: What to Confirm Before You Send a Tech Pack
- T-Shirt Manufacturer China: A GSM and Fabric-Cost Benchmark by Weight Class

